text.skipToContent text.skipToNavigation

Cable Avoidance Tools & Accessories

11 Results found

Display using
  • Category

  • Brand

  • Colour

  • Price Range

  • Code:3178203
    Discover...
    Designed to work with the C.Scope CXL3 cable avoidance tool, this signal generator is sure to make cable avoidance tasks far easier and more efficient. This signal generator enables users to locate buried utilities including street light cables and is supplied with an accessory tray, direct connection leads, an earth stake, two connection magnets and 10m earth lead.

    Learn more...
    • Signal generator that puts out 33kHz continuously or as a pulse
    • A critical tool for the C.Scope CXL3 cable avoidance tool, available separately
    • Significantly increases the number of buried services that can be detected and reduces the risk of striking cables
    • Supplied with a large accessory tray, direct connection leads, an earth stake, a connection magnet and a 10m auxiliary earth lead
    • Features a clear and audible signal output so you know when it is operating, as well as an audio mute control
    • Twin-wall construction ensures this signal generator meets IP65 standards and is durable, dust-resistant and waterproof
    • C.Scope signal clamps, tracers, carry bags and injectors available separately
  • Code:3178202
    Discover...
    Evade buried services with the C.Scope CXL3 cable avoidance tool, an incredible cost-effective and clever device crafted from weather-resistant, high-impact plastic and featuring several detection modes. Whichever mode you select will be displayed on the LCD screen, along with signal strength and battery condition, so you have all the information you need to accurately and reliable record cables and pipes.

    Learn more...
    • Robust and durable avoidance tool
    • Fully weatherproof IP65 design thanks to high-impact plastic and able to withstand drops onto hard surfaces up to one metre
    • Features multiple modes of detection: power, radio and signal generator with 33kHz frequency
    • Has an LCD display that shows signal strength, which mode is selected and battery condition
    • Supplied with a detachable speaker ideal for noisy work environments
    • Requires eight AA LR6 alkaline batteries or NiMH rechargeable batteries
    • The battery pack will usually deliver up to forty hours of intermittent use at 20°C
    • Periodic calibration is necessary
  • Code:3178210
    Discover...
    When utilised alongside a C.Scope cable avoidance tool, this general purpose sonde allows the user to find and track non-metallic pipes including sewers, drains and cable ducts. Not only can you trace routes, but this equipment will help you find blockages in pipes, even those up to seven-metres (23ft) deep, depending on the C.SCOPE locator model used and site conditions.

    Learn more...
    • Non-metallic pipe sonde crafted from epoxy-resin filled IP68-rated plastic
    • Transmits a 33kHz signal that can be detected at up to seven metres deep, depending on the environment and accompanying equipment
    • Fits into pipes with a diameter up to 50mm
    • Suitable for use with C.Scope cable avoidance tools
    • Powered by one AA LR6 battery, available separately
  • Code:3178211
    Discover...
    This C.Scope signal clamp allows for safe use of C.Scope signal generators and transmitters to identify and specify individual pipes and cables with a diameter up to 105mm, enabling far more accurate mapping. The clamp is constructed from a toroidal induction ring with a robust plastic coating and features spring-loaded jaws that make applying this clamp especially easy.

    Learn more...
    • Signal clamp tuned for use with 33kHz signal generators, available separately
    • Constructed from a toroidal induction ring in a robust plastic with spring-loaded jaws
    • Perfect for accurately energising individual metal pipes and cables
    • Able to clamp onto cables with a diameter up to 105mm
    • Features a 2m lead
    • Dimensions: 270mm x 160mm x 28mm
  • Code:3178212
    Discover...
    This C.Scope signal injector is, when connected to a C.Scope signal generator or transmitter, is able to create a signal throughout an electrical system via a three-pin power socket. This signal is then detectable when using a C.Scope cable avoidance tool on the buried supply cable outside the building.

    Learn more...
    • Signal injector essential for applying a signal safely to an electricity supply cable
    • Applies a signal to electrical systems through a three-pin power socket
    • Signal is detectable for a cable avoidance tool
    • Entirely weatherproof with a rating of IP65
  • Code:3178213
    Discover...
    Designed for use with C.Scope cable locators and signal generators, this flexible tracer makes locating and tracing small-diameter non-metallic pipes, ducts and drains as simple as possible. Simply attach a signal generator and this rod will transmit accurate signals to ensure you know where pipes are located before beginning an excavation or other building work.

    Learn more...
    • Flexible pipe tracer ideal for use in small-diameter, non-metallic pipes
    • Suitable for line and tip tracing
    • Works with C.Scope signal generators and cable avoidance tools, available separately
    • Uniform diameter allows for easy use with any proprietary insertion gland
    • Tracer rod is crafted from flexible, chemical-resistant plastic
    • Supplied in a robust plastic housing

    Pipe tracer featuresMeasurements
    Tracing rod length50m
    Rod diameter6mm
    Sonde diameter6mm
    Operating frequency33kHz
    Detection depth range4m
    Operational temperature range-20°C to 50°C
  • Code:3178214
    Discover...
    The C.Scope heavy-duty carry bag is a carefully constructed holdall with multiple compartments for a wide variety of C.Scope equipment. Whether you need to transport cable avoidance tools or simply want to keep a few accessories on hand, this robust nylon bag is sure to become a constant companion.

    Learn more...
    • 38L capacity carry bag
    • Constructed from heavy-duty nylon to ensure durability
    • Reinforced holdall handles ensure that contained equipment is safe
    • Suitable for a wide range of C.Scope equipment, as well as site maps, line marking paint and pegs
  • Code:3178215
    Discover...
    Designed for use with C.Scope cable locators and signal generators, this flexible tracer has been designed to make locating and tracing small-diameter, non-metallic pipes, ducts, sewers and drains as simple as possible. Simply attach a signal generator via the slipring and this rod will transmit accurate signals for cable avoidance tools to ensure you know where pipes are located before beginning an excavation or other building work.

    Learn more...
    • Flexible pipe tracer ideal for use in thin, non-metallic pipes, ducts, sewers and drains
    • Suitable for pre-excavation line and end tracing
    • Requires a C.Scope signal generator and a cable avoidance tool, available separately
    • Features a slipring that allows for drum rotation during use
    • Integral copper wires with IP68-rated fibreglass cladding and an integrated sonde tip
    • Supplied on a solid steel frame that turns on an axel to unravel or collect the tracer

    Pipe tracer featuresMeasurements
    Tracing rod length80m
    Rod diameter5mm
    Tip sonde diameter9.5mm
    Operating frequency33kHz
    Detection depth range4m (at tip) | 3m (along line)
    Minimum rod bend-radius10cm
  • Code:3178216
    Discover...
    The C.Scope CXL4 cable avoidance tool is packed full of functions and features that make discovering cables and pipes exceedingly simple. Operating on both 33kHz and 131kHz, this detector has four different modes, a built-in alarm for shallow underground services and will even alert you if there’s too much swing that could affect accuracy. Any data you do record will be logged away for up to a year and can be uploaded to a PC for review using C.Scope's PC Toolkit data management software.

    Learn more...
    • Robust and durable data-logging dual-frequency cable avoidance tool
    • Stores up to one year of data
    • Features multiple modes of detection: power, radio, AllScan and simultaneous 33kHz and 131kHz
    • AlarmZone alerts users of shallow pipes and cables
    • Dynamic swing sensor picks up excess swinging, which may compromise accuracy
    • Automatic daily self-test (ADST) checks the functionality of your device, removing the need for annual calibration
    • Has a high-resolution backlit digital display with a protective polycarbonate lens
    • This display shows which detection mode the device is in, signal peak level, signal strength and battery condition as well as ADST results
    • Equipped with data-logging which can be used to monitor best practice
    • Compatible with the C.Scope Toolkit data management software
    • A detachable speaker ideal for noisy work environments
    • PeakHold ensures the operator can pinpoint exactly where services are buried
    • Suitable for use with C.Scopes SGA4 or SGV4 signal generators
    • Requires eight AA LR6 alkaline batteries or NiMH rechargeable batteries
    • The battery pack will usually deliver up to forty hours of use
  • Code:3178218
    Discover...
    Designed for use with CXL4 or DXL4 cable avoidance tools, this signal generator makes locating and tracing underground utilities including street lighting cables simple. The simultaneous dual-frequency 33kHz and 131kHz signal output from this signal generator is particularly ideal for maximising the number of buried services that can be energised and then detected.

    Learn more...
    • Signal generator with simultaneous dual-frequency 33kHz and 131kHz output
    • A critical tool for C.Scope cable avoidance tools, available separately
    • Significantly increases detecting capabilities and reduces the risk of striking cables
    • Offers three ways to apply the signal: direct connection, wraparound and induction
    • Also has four power level adjustments, offering the operator total control
    • A built-in datalogging system can store a year’s worth of information, which can also be transferred via USB for best practice review
    • Features a clear and audible signal output so you know when it is operating, as well as an audio mute control
    • This device performs an automatic daily self-test (ADST) to ensure it is operating at an optimal level, removing the need for annual calibration
    • Has a clear back-lit LCD display with a protective polycarbonate lens that displays which functions are operating, the power level, connection quality, battery conditions an ADSTs
    • Twin-wall construction ensures this signal generator is durable, dust-resistant and waterproof
    • Supplied with a large accessory tray, direct connection leads, an earth stake, two connection magnets and a 10m auxiliary earth lead
    • A range of C.Scope accessories including signal clamps, signal injectors, flexible tracers and carry bags are available separately
  • Code:3178217
    Discover...
    The C.Scope DXL4 cable avoidance tool is packed full of functions and features that make discovering cables and pipes exceedingly simple. Capable of operating on both 33kHz and 131kHz, this detector has four different modes, a built-in alarm for shallow underground services and will even alert you if there’s too much swing that could affect accuracy. Any data you do record will be logged away for up to a year and can be uploaded to a PC. Unlike the CXL4 model, this device also detects the depth of objects, so you can check more precisely where underground services are located.

    Learn more...
    • Robust and durable data-logging dual-frequency cable avoidance tool
    • Stores up to one year of data
    • Features multiple modes of detection: power, radio, AllScan and simultaneous 33kHz and 131kHz
    • AlarmZone alerts users of shallow pipes and cables
    • Depth accuracy ±5% at 1m
    • Dynamic swing sensor picks up excess swinging, which may compromise accuracy
    • Automatic daily self-test (ADST) checks the functionality of your device, removing the need for annual calibration
    • Has a high-resolution backlit digital display with a protective polycarbonate lens
    • This display shows which detection mode the device is in, signal peak level, depth, signal strength and battery condition as well as ADST results
    • Can connect to other devices via USB to transfer data
    • Compatible with the C.Scope PC Toolkit data management software
    • A detachable speaker ideal for noisy work environments
    • PeakHold ensures the operator can pinpoint exactly where services are buried
    • Suitable for use with the SGA4 or SGV4 signal generators
    • Requires eight AA LR6 alkaline batteries or NiMH rechargeable batteries
    • The battery pack will usually deliver up to forty hours of use
    • Weight: 2.65kg
    • Dimensions: 720mm x 280mm x 65mm
Nearby Stores