Product is featured in
First Aid/Emergency Showers
Product Notes
There are no additional notes about this product.
First Aid/Emergency Showers
Product Notes
There are no additional notes about this product.
Discover...
This Hughes trace-heated safety shower has been designed solely to ensure employees in cold and/or hazardous areas can shower immediately following an incident, thereby reducing damage. The pre-insulated body of this wall-mounted frost-resistant shower is heated by trace tape, so users can rely on consistently heated water to wash themselves in an emergency. Ultimately, this safety shower is perfect for factories, laboratories and numerous other work environments as it is versatile, takes up little space and is incredibly easy to operate.
Learn more...
• Wall-mounted trace-heated emergency safety shower crafted from pre-insulated stainless steel
• A safety shower is an essential form of emergency first aid designed to limit the effects of exposure to harmful materials
• Emergency showers are required in any workplace where there is a risk of individuals being exposed to hazardous substances, such as corrosive chemicals
• Heated by 10W/m trace tape, which is fitted with an ambient air-sensing thermostat to prevent overheating
• The body of this shower is insulated by a polyethylene jacket to ensure water stays at an optimal temperature
• This shower is operated through pulling a cord which opens the valve to release water
• The shower is fitted with a self-draining nylon spray nozzle
• Suitable for use in outdoor non-flammable areas, as well as ATEX zone 1 and zone 2 environments
• ATEX zone 1 are locations with explosive atmospheres in which hazardous gases and combustible dust are likely to exist during normal operation, therefore extreme caution and certified safety equipment should be used
• ATEX zone 2 are locations with explosive atmospheres in which hazardous gases and combustible dust are unlikely to exist and if they do, only for a short amount of time
• This unit can be fed water from the base or from a water supply pipe in the wall
• Should be mounted between 2083mm and 2438mm from the floor
• Can be paired with indicator lights, proximity switches and platforms, available separately
• Shower has an average flow rate of 76L/min, with a consistent pressure of between 2 bar and 6 bar
• Water inlet: 1" female BSP
• Operating temperature range: -20°C to 35°C
• Voltage: 240V
Get technical...
ATEX zone 1/2 (IIA IIB T3)
Great for...
Factories / laboratories / telecommunications
This Hughes trace-heated safety shower has been designed solely to ensure employees in cold and/or hazardous areas can shower immediately following an incident, thereby reducing damage. The pre-insulated body of this wall-mounted frost-resistant shower is heated by trace tape, so users can rely on consistently heated water to wash themselves in an emergency. Ultimately, this safety shower is perfect for factories, laboratories and numerous other work environments as it is versatile, takes up little space and is incredibly easy to operate.
Learn more...
• Wall-mounted trace-heated emergency safety shower crafted from pre-insulated stainless steel
• A safety shower is an essential form of emergency first aid designed to limit the effects of exposure to harmful materials
• Emergency showers are required in any workplace where there is a risk of individuals being exposed to hazardous substances, such as corrosive chemicals
• Heated by 10W/m trace tape, which is fitted with an ambient air-sensing thermostat to prevent overheating
• The body of this shower is insulated by a polyethylene jacket to ensure water stays at an optimal temperature
• This shower is operated through pulling a cord which opens the valve to release water
• The shower is fitted with a self-draining nylon spray nozzle
• Suitable for use in outdoor non-flammable areas, as well as ATEX zone 1 and zone 2 environments
• ATEX zone 1 are locations with explosive atmospheres in which hazardous gases and combustible dust are likely to exist during normal operation, therefore extreme caution and certified safety equipment should be used
• ATEX zone 2 are locations with explosive atmospheres in which hazardous gases and combustible dust are unlikely to exist and if they do, only for a short amount of time
• This unit can be fed water from the base or from a water supply pipe in the wall
• Should be mounted between 2083mm and 2438mm from the floor
• Can be paired with indicator lights, proximity switches and platforms, available separately
• Shower has an average flow rate of 76L/min, with a consistent pressure of between 2 bar and 6 bar
• Water inlet: 1" female BSP
• Operating temperature range: -20°C to 35°C
• Voltage: 240V
Get technical...
ATEX zone 1/2 (IIA IIB T3)
Great for...
Factories / laboratories / telecommunications
Specification
| Standards | |
|---|---|
| ATEX approved | true |
| Depth | |
|---|---|
| Depth (m) | 890 |
| Features | |
|---|---|
| Connector type | Female |
| Flameproof | false |
| Location | Outdoor |
| Thread type | BSP |
| Vendor Part Number | EXP-AH-2G |
| Brand | Hughes |
| Brand Type | Vendor |
| Height | |
|---|---|
| Height (m) | 2320 |
| Size Info | |
|---|---|
| Generic dimension | One Size |
| Generic dimension Options | One Size |
| Water inlet size (in) | ?1 1/4 |
| Type | |
|---|---|
| Fixing type | Wall fixing |
| Width | |
|---|---|
| Width (m) | 475 |
Documents
Reviews
Delivery & Returns
Free delivery on all orders over €100 ex. VAT.
Returns of faulty items are free of charge, no fault returns may be subject to a handling charge. Please see the Arco Standard Returns Policy.
Returns of faulty items are free of charge, no fault returns may be subject to a handling charge. Please see the Arco Standard Returns Policy.