You are here: Gloves > Hand Protection > Mechanical Hazard > PU Gloves
(see individual codes for details)
Not what you are looking for?
Find similar products here
BSEN388 - Mechanical Hazard - 2003
Mechanical Hazards are associated with the handling of rough or sharp objects which could abrade, cut or pierce the skin, such as glass, thin metal sheet and masonry blocks.
A mechanical hazard is not associated with moving machinery, in fact it can be extremely dangerous to wear gloves which could catch in moving parts or serrated blades*.
*Note - Gloves should not be used when working with serrated blades. USE GUARDS.
0 = Abrasion (Performance Index 1-4)
0 = Blade Cut (Performance Index 1-5)
0 = Tear (Performance Index 1-4)
0 = Puncture (Performance Index 1-4)
Note: Where 1 is the lowest and X indicates no rating
BSEN374 CATIII - Chemical Hazard
Whether total immersion or merely splash is involved, any substance which would irritate, inflame or burn the skin is classed as a Chemical Hazard.
Some substances can cause the skin to become sensitised over a period of time while others have a more immediate and painful effect.
The European Norm covering the performance of Chemical Protective Gloves has been revised and is now identified as BSEN 374.2003. In order that a more informed and relevant glove selection can be made, a list of 12 chemicals, identified by the letters A to L, has been nominated and a manufacturer has to submit gloves to be tested against any 3 of these chemicals before approval is obtained. Penetration and permeation of the chemical through the glove is measured to determine the breakthrough time.
The micro-organism pictogram can be used where the glove performs to at least level 2 for the permeation test i.e. Greater than 30 minutes.
Stocked item, normally delivered in 3 days.
Free delivery on all orders over €50 ex. VAT.
Two day delivery is available for orders of this item placed before 4pm.
Returns of faulty items are free of charge, no fault returns may be subject to a handling charge. Please see the Arco Standard Returns Policy.
Please Note: You may have disabled JavaScript and/or CSS. Although this content will be accessible, certain functionality is unavailable.
Arco Cut Control System E PU-Coated Gloves
14T3408
From €12.79
Arco Comfort Light PU-Coated Gloves
1235710
From €3.95
Skytec Rhyolite PU-Coated Assembly Gloves
14G5307
From €3.39
Skytec Ninja Lite PU-Coated Gloves
14G6110
From €4.52
Ansell AlphaTec 02-100 Chemical-Resistant Gloves
1521011
From €13.35
Product
reviews
There are no published reviews for this product.
Find us on:
Arco Safety web site help desk - Need help email: web.help@arco.co.uk © Arco Safety Limited, B11 Ballymount Corporate Park, Ballymount Avenue, Ballymount, Dublin 12
VAT No: 9694470R
